Transportation & Logistics Use Cases
Explore use cases tailored for the Transportation & Logistics industry
3 use cases
Fuel Management
Fuel Management & Theft Prevention
Transportation & Logistics
Fuel theft on commercial fleets shows up in three patterns: tank drainage during a stop, underfilling at the refueling point, and fraud against the fuel card or paper voucher. None are visible to the OEM dashboard gauge, and all three look identical to a manual dipstick check the next morning. Closing the gap takes a precision fuel-level sensor in every tank, an in-line flow meter or contactless pump-nozzle reader where trips are short, and a GPS tracker tying every event to vehicle, time, location, and driver. Operators running this approach worldwide typically report fuel-theft incidents reduced to zero and fuel-cost reductions between 15% and 30%. Documented cases include 150 trucks in Mexico, a major bank's standby generator bank in Nigeria, and a 300+ vehicle construction fleet.
Fuel Consumption Optimization
Transportation & Logistics
Measure what each trip actually burns — not an estimate from distance times a published MPG figure. Three complementary methods cover the operational reality. In-line flow meters report the litres passing through the fuel line, the most accurate option for long-running engines and generators. Fuel-level sensors track tank drawdown over the operating window, the best fit where a flow meter is impractical. Contactless CAN-bus readers extract the engine ECU's own consumption figure where the vehicle exposes it. Each method is right for a different problem. Long-haul trucks lean on flow + level together. Marine engines and standby generators need differential metering — supply line minus return line, because a single in-line meter on the supply side overstates burn by 30 to 60%. Older trucks and special machinery the OEM never wired for telematics get pulse-based metering at the injector or pump nozzle. Operators running this stack worldwide typically report 15-30% fuel-cost reductions on tipper and special-vehicle fleets, and 16% on standby generator banks.
Fuel Level Monitoring
Transportation & Logistics
Know exactly how much fuel is in every tank, every second of the day. A precision fuel-level sensor sits inside the tank and reports the real level to your GPS tracker with around 1% measurement accuracy and millimetre-level sensitivity to change — independent of the OEM dashboard gauge, which typically reads in quarter-tank steps and cannot tell a refuel from a drain. From that one signal the platform separates three things the dashboard cannot: a legitimate refueling event (a controlled rise at a known time and place), a drainage or siphon (a sharp fall outside the expected pattern), and continuous consumption during operation. Each event is timestamped against location and driver, so fuel data lines up with where the vehicle was and who was responsible. Operators running this approach worldwide typically report meaningful fuel-cost reductions — documented cases include 150 trucks in Mexico (25% fuel-expense decrease) and stationary site tanks up to 300,000 litres where theft was eliminated entirely.
Looking for a complete solution?
Browse Solutions