Workforce Solutions
In-cab AI dash-cams watch the road and the driver at once — catching fatigue, distraction, and phone use, warning on tailgating and forward-collision risk, every event scored for IVMS and ISO 39001.
Talk to usMost fleet incidents trace back to the driver — drowsy, distracted, or too close to the vehicle ahead.
Driving-safety devices put an AI co-pilot in the cab: a driver-facing camera catches fatigue and distraction and alerts in real time, road-facing ADAS warns on lane departure, tailgating, and forward-collision risk, and blind-spot detection protects pedestrians and cyclists around heavy vehicles. Every event is scored and saved with video, giving fleet managers the evidence to coach drivers and the records to meet IVMS and ISO 39001 requirements.
A driver-facing AI camera watches for eye-closure, yawning, phone use, smoking, and looking away from the road, and sounds an in-cab alert the moment it sees one — so a drowsy or distracted driver is corrected before it becomes an incident. The C29N and MettaX DMS cameras run this continuously, day or night.
A road-facing camera runs ADAS — warning on lane departure, tailgating, and imminent forward collision — while blind-spot detection catches pedestrians and vehicles alongside heavy trucks and buses, where the driver can't see. The MC401X, MC403L, A16MAX, and C53 cover the road and the sides at once.
Every alert is scored and saved with the video clip that triggered it, so fleet managers can rank drivers, coach the risky ones, and prove due diligence. The records export for IVMS reporting and align with ISO 39001 road-traffic-safety and Vision 2030 fleet-safety goals.
MC401X
Quad-channel 4G AI dashcam with 2 built-in cameras and 2 external camera inputs for complete vehicle coverage. The front-facing 1080P camera provides ADAS alerts including lane departure, forward collision, and headway monitoring warnings. The built-in 720P IR cabin camera monitors driver behavior through DMS, detecting phone use, fatigue, and smoking. Two additional 720P external camera inputs enable blind spot detection and rear coverage. Features a 3-axis G-sensor that auto-locks crash footage on impact, RS232 interface for fuel and temperature sensors, and real-time 4G video streaming to fleet management platforms.
MettaX
MC403L
Quad-channel 4G AI dashcam with 1 built-in front camera and 3 remote camera inputs for comprehensive vehicle monitoring. The built-in 1080P camera provides ADAS forward collision, lane departure, and pedestrian collision warnings. Remote DMS camera monitors driver behavior including drowsy driving, phone calls, smoking, and distracted driving detection. BSD capability detects peripheral pedestrians and vehicles in blind spots using time-to-collision algorithms. Features dual-platform server support for simultaneous data upload to up to 4 IP servers, RS232 for external sensors, and dedicated SOS button.
MettaX
A16MAX
16-channel AI mobile digital video recorder supporting 8 IPC and 8 AHD camera inputs for comprehensive vehicle surveillance. Features built-in AI NPU for on-device ADAS, DMS, BSD, and passenger counting analytics. Dual storage with SSD and HDD for high-capacity recording. SerDes display output for high-bandwidth video to CP16MAX monitor. Integrated GPS, 4G, WiFi, and Bluetooth connectivity with operating temperature range of -30 to +70 degrees C.
Streamax
AD Plus 2.0
4-channel AI dashcam with dual ultra-wide front and cabin lenses supporting up to 1920P HD recording. Expands to 4 channels with 1 AHD and 1 IPC external camera input. Features real-time AI detection of risky driver behaviors with in-cab alerts, remote HD video playback, and fleet platform integration for coaching and compliance analysis. Built-in WiFi, Bluetooth, 4G, and inertial navigation with AES256 encryption and TLS1.3 secure data transmission. Supports up to 2×512GB MicroSD cards with simultaneous main and sub-stream recording for extended retention.
Streamax
C29N
Built-in AI driver-monitoring (DMS) IP camera that watches the driver for unsafe behaviour — fatigue, phone use, smoking, seatbelt status, and distraction — and issues real-time audio and visual alerts. A 1/4-inch global-shutter sensor at 1280×800 pairs with a 3mm F1.7 lens and infrared light filling for 0-lux operation, while central-area face exposure keeps the driver correctly exposed under backlight. A built-in G-sensor auto-adjusts the image to the mounting angle, and the camera installs on the A-pillar, windshield, or dashboard. It runs on PON 9–18V at under 2.4W, connects over 10/100M Ethernet (H.264/H.265), and is rated IP53 for in-cab use from −40 to +70°C.
Streamax
MC202X
2-channel 4G AI dashcam with dual 1080P cameras for road and cabin monitoring. The front camera provides ADAS lane departure and collision warnings while the IR-equipped cabin camera enables DMS driver behavior monitoring including fatigue and phone use detection. Features Power Disconnection Alert that seamlessly switches to backup power during disruptions, ensuring uninterrupted video recording and immediate notifications. Supports real-time 4G video streaming to fleet platforms, RS232 interface for external sensors, and H.264/H.265 compression for storage efficiency.
MettaX
C6 Lite 2.0
Entry-level 2-channel AI dashcam with dual ultra-wide front and cabin lenses supporting up to 1080P HD recording. Designed as a cost-effective way for small-to-medium fleets to adopt ADAS and driver safety monitoring. Features up to 2×512GB MicroSD storage with simultaneous main and sub-stream recording, built-in WiFi and 4G connectivity, and a 6-axis G-sensor for driving event detection. OBD-based installation for user-friendly setup. Includes AES256 encryption and TLS1.3 for secure data transmission, plus echo-cancellation for clear platform-to-cabin communication.
Streamax
C53
AI blind-spot detection camera (model 960C53) for large and medium freight vehicles, with detection meeting European standard R151. A dual-lens design — a 175° ultra-wide overhead-road lens plus a 6mm rear-view telephoto lens, both 1080P — covers the side blind zone, and it expands with one AHD camera for the front blind zone. Independent on-device AI uses a pure-vision solution with semantic-segmentation filtering (road edges, kerbs, railings), alarm-blocking for lens contamination, and relative-motion-trend analysis to cut false alarms. It warns people outside the vehicle and the driver through an external display and audible/visual alarms. IP69K rated, -40 to +75°C, with a 6-axis G-sensor, CAN (J1939), RS232/RS485, and an MDVR interface.
Streamax
ML214
The MettaX ML214 is an offline four-channel blind-spot detection kit for heavy vehicles and site equipment. Four 140° infrared cameras feed a 10.1-inch touchscreen for a 360° view around the machine, and a sound-and-light alarm sensor warns pedestrians and cyclists who enter the blind zone. It records to a local TF card of up to 256 GB with no SIM or cloud connection — mounted on trucks, excavators, and loaders it keeps drivers and ground workers visible to each other on busy roads and tight worksites.
MettaX
B2
Outdoor-mounted pedestrian warning device for blind spot detection systems. Connects to host MDVR or dashcam via RS485. Activates LED and buzzer alerts to warn pedestrians and cyclists in the vehicle blind spot zone when the host AI detects their presence. IP67 waterproof for long-term external vehicle mounting.
Streamax
B3
Indoor-mounted driver warning device for blind spot detection systems. Connects to host MDVR or dashcam via RS232. Activates LED and buzzer alerts to notify the driver when the host AI detects pedestrians or vehicles in the blind spot zone. Dashboard or A-pillar mounted for driver line-of-sight visibility.
Streamax
Talk to our team about integrated technology solutions for your business.
