Queclink

ATP100

The ATP100 external tire pressure monitoring sensor, paired with Queclink’s tracking devices, allows for real-time tire pressure and tire temperature monitoring, and real-time alerts of abnormal tire pressure. The data collected by the ATP100 is transmitted to Queclink’s tracking device via BLE, and then uploaded to the backend server. The ATP100 external tire pressure monitoring sensor is easy to install, and features tamper and theft resistant design, as well as long standby time with replaceable battery. It can be used on SUV, minibus, pickup, golf s, motorcycle, small campers, etc.

Queclink

ATP102

The ATP102 built-in tire pressure monitoring sensor, paired with Queclink’s tracking devices, allows for real-time tire pressure and tire temperature monitoring, and real-time alerts of abnormal tire pressure. The data collected by the ATP102 is transmitted to Queclink’s tracking device via BLE, and then uploaded to the backend server. The ATP102 built-in tire pressure monitoring sensor features large battery capacity, long standby time, accurate tire pressure measurement and built-in installation to avoid damage. It can be used on SUV, minibus, pickup, golf s, motorcycle, small campers, etc.

Queclink

ATP200

The internal strip TPMS sensor collects tire pressure, tire temperature data, transmits to repeater or receiver by RF433, the sensor is installed on the inner hub of the tire by strap.

Queclink

CAN100

CAN100 decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. The CAN100 provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors. This accessory is available in three versions: 1.CAN100 STD, suitable for GV350MG, GV300, GV300W, GV75 and GV75W devices 2.CAN100 INV, suitable for GV300, GV65 and GV65 Plus devices 3.CAN100 INV with cable, suitable for GV300, GV65 and GV65 Plus devices

Queclink

CAN100 BLE

The CAN100 BLE decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. It provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors via BLE.

Queclink

DR200

The DR200 includes an RFID reader and two RFID cards which can communicate with the Queclink GV series models through the 1-wire interface. It is used for driver identification in fleet management applications. Supported devices: GV65/GV300CAN/GV56/GV56RS/GV350MG (1-wire connection) GV300/GV300W/GV75/GV75W (RS232 connection by Queclink AC100 Kit)

Queclink

GB100CG

The GB100CG is an upgraded version of the GB100 battery powered series that integrates LTE Cat1 technology. In addition to its compact and IP67 waterproof design, the GB100CG is easy to install on various types of vehicles with a 2-wire connection.The product features a 6-axis sensor and up to 1600Hz sampling rate, providing functions such as driver behaviour monitoring, crash detection and mileage logging, making it well suited for insurance applications and connected car services.

Queclink

GB130MG

The GB130MG is the LTE version of our proven usage-based insurance telematics product GB100P. Its built-in 6-axis accelerometer allows accurate accident data sampled at up to 400 times per second. With built-in BLE it supports wireless accessories; thus allowing the product to be flexible and suitable for applications beyond insurance data acquisition. The GB130MG is a vehicle battery mounted product specifically designed to lower the installation costs of telematics products in the usage-based insurance market. Its internal battery and waterproof enclosure maintain stable and reliable performance when installed in the engine compartment of vehicles. The GB100 series is proven to provide accurate and reliable data under the metal hood of a vehicle engine and has been used successfully in the delivery of several large UBI projects for insurers and service providers alike. CE, FCC, PTCRB, T-Mobile, Verizon, AT&T, USCC,E-Mark, IC

Queclink

GL-HM

GL-HM is an optional magnetic case for GL300 product.

Queclink

GL33CG

The GL33CG is a LTE CAT1 fallback 2G tracking device covered with a box specially designed for cargo recovery. It is ideal for recovering expensive merchandise which is packed mainly with on boxes and might be stolen in transport before they arrive at the destination. It transmits the GPS/LBS location information via LTE CAT1/GSM/GPRS to server and can be detected by a search device (detector device) operating (433/434MHz) through RF signal.

Queclink

GL500M Magnetic Mounting Bracket

Used for magnetic installation mounting of GL500MG and GL501MG products.

Queclink

GL521MG

The GL521MG is derived from our successful GL500MG by supporting NB2 and adding Qi wireless charging and BLE. Our customers love the battery-powered GL500MG but still wanted a rechargeable version for certain scenarios. We designed this version without impacting the waterproof and robust enclosure. Adding BLE allows connectivity to diverse wireless accessories.With internal temperature and light sensors, the product is ideal for a wide range of environmental monitoring applications such as cold chain logistics, warehouse management, cargo trucking, high-value static asset monitoring and more. The GL521MG supports several mounting alternatives which use unique clip on design to securely attach the device to any asset.

Queclink

GL52LP

The GL52LP is Queclink’s first LoRa integrated product, targeting stationary asset monitoring, inventory control and other tracking management applications that require both a small size and a battery life of over 4 years. The GL52LP is an excellent example of Queclink’s commitment to invest in emerging new technologies. LPWA solutions, such as LoRa, provide a very low power alternative when engaged in battery powered applications. It is equipped with GNSS receiver and motion sensor for location and motion detection.

Queclink

GL530MG

The GL530MG is the upgraded LTE Cat M1/NB2 version of GL500MG. It integrates the latest low-power wide area network standards and covers a broader area, making it more flexible to deploy. It is an easy-to-deploy asset tracker built on Queclink’s innovative power management technology. It lasts for up to seven years and features one of the longest battery lives among devices of its size in the market. The built-in light sensors make the product sensitive to tamper attempts and its waterproof design allows it to be used in harsh environments. With internal temperature and light sensors, the product is ideal for a wide range of environmental monitoring applications such as cold chain logistics, warehouse management, cargo trucking, high-value static asset monitoring and more. The GL530MG supports several mounting alternatives which use unique clip on design to securely attach the device to any asset. Anatel, FCC, Verizon, PTCRB, AT&T, USCC, CE, T-Mobile

Queclink

GL601CEU

The GL601CAU is a rugged, self-sustaining LTE CAT 1 with 2G fallback tracker, ideal for efficient management of containers, trailers, and rail wagons. With its advanced solar harvesting technology, it can operate with zero maintenance for up to 10 years. The built-in rechargeable large battery supports multimodal operation based on transportation needs, ensuring real-time tracking during movement or low-frequency reporting when stationary. Utilizing LTE Cat1 technology eliminates concerns about network coverage for inter-regional transportation. Additionally, it features a light sensor for tamper alerts, a temperature sensor for ambient condition monitoring, and offers extended functionalities with BLE and Wi-Fi connectivity.

Queclink

GL601CEU

GL601CEU is a ruggedized, self-sustaining LTE Cat1 tracker ideal for efficient management of containers, Trailers, Rail wagons. With its advanced solar harvesting technology, it is able to realize as zero-maintanence throughout a lifecycle of up to 10 years. The equipped rechargeable big battery is catering the multimodal working mode based on transportation needs, ensuring real-time tracking during movement or a low sending frequency when stationary. Utilizing LTE Cat1 technology eliminates concerns about network coverage for inter-regional transportation. Additionally, it features a light sensor for tamper alert, a temperature sensor for ambient condition monitoring, and offers extend functionalities with BLE and Wi-Fi connectivity.

Queclink

GV305CEU

The GV305CEU is a versatile LTE Cat 1 vehicle tracker ideal for fleet management with GNSS connectivity. With multiple interfaces, the device supports a wide range of pre-integrated accessories either of Queclink or from our selected partners via RS232 or RS485 serial ports, providing additional functions such as fuel level monitoring and driver identification. Its built-in BLE allows connectivity to diverse wireless accessories such as BLE beacons and temperature monitoring sensors.

Queclink

GV30CEU

The GV30CEU is an ultra-low cost LTE Cat 1 Fallback 2G GNSS tracker. Its extremely compact design facilitates easy and covert installation. Its compact size and powerful features make it an ideal choice for a wide range of transportation monitoring applications such as automobile finance, stolen vehicle recovery, car leasing, and logistics.

Queclink

GV350CEU

The GV350CEU is the new generation advanced telematics solution equipped with LTE Cat 1 and high precision positioning GNSS modules. It can read advanced vehicle data from heavy trucks (CAN and J1708), light commercial vehicles and passenger cars without interfering with vehicle bus wiring or vehicle data ports. With multiple interfaces, the device supports a wide range of pre-integrated accessories either of Queclink or from our selected partners via RS232 serial port and 1-wire interface, providing additional functions such as fuel level monitoring and driver identification. Its built-in BLE allows connectivity to diverse wireless accessories such as BLE beacons and temperature monitoring sensors.

Queclink

GV350MG

The GV350MG improves on the GV300 based on customer feedback and adds LTE capability to our successful GV300 2G product. The GV350MG’s CAN interface can be customized to suit specific protocols required by customers. This interface customization has been utilized in tractor integration and other unique situations with specific CAN requirements. Heavy trucks supporting J1939 FMS can be integrated with GV350MG and its multiple accessories such as dual fuel sensors, Garmin FMI products, cameras and Queclink’s I/O extenders.

Queclink

GV355CEU

The GV355CEU is Queclink’s new flagship telematics device dedicated to advanced fleet applications. Equipped with powerful vehicle data interpreter, the device can be connected to almost all tachograph models (including D8 and CAN interface tachograpah) to remotely download the tachograpah data and DDD file. In addition, it supports J1708 and all kinds of CAN bus-equipped vehicles, enabling advanced vehicle data reading, including DTC. Integrated with LTE Cat 1 and high precision GNSS module, GV355CEU ensures full coverage and reliable connection. With built-in BLE and multiple interfaces, the device supports connectivity to diverse accessories to enable temperature monitoring, driver identification, as well as event alert.

Queclink

GV57MG

The GV57MG integrates the latest low-power wide area network standards and covers a broader area, making it more flexible to deploy. With waterproof design, it ensures the product remains reliable when installed in the harsh environments. It offers basic digital I/Os that can be used for ignition detection and vehicle control. The product features Queclink’s zero power consumption, allowing owners to leave their cars and motorcycles unattended for long periods of time without having to worry about a flat battery. The product is ideal for stolen vehicle recovery, motorcycle monitoring and other basic tracking applications.

Queclink

GV58CEU

The GV58CEU is the most LTE Cat 1 telematics device ideal for variety of fleet management applications range from general fleet tracking, car rental and leasing, stolen vehicle recovery, logistics and more. The GV58CEU optimizes the available I/Os, allowing fuel cut-off, ignition detections, and a single analog sensor in addition to driver identification over 1-wire or BLE. Supported accessories include a range of BLE-based temperature and humidity, fuel level as well as angle tilt monitoring solutions offered either from Queclink or selected partners.

Queclink

Queclink GV600 Mounting Bracket

GV600W Mounting Bracket

An iron bracket for GV600 series products installation. Bracket installation kit includes: One mounting bracket Four serrated flange nuts Four flat head screws

Queclink

GV620MG

The GV620MG is an LTE product specifically designed for heavy duty vehicles including trailers, tankers, refrigerated and flatbed trucks. Its ruggedized waterproof design ensures the product remains reliable when installed in the harsh environments commonly found in heavy transportation such as fuel and chemical transportation. The GV620MG can work for up to three months without external power, making it ideal for tracking trailers even when disconnected. The wide range of pre-integrated wired and wireless accessories provided either by Queclink, or our carefully selected partners, allows users to apply the GV620MG in various fleet industries. Additionally, this product supports dual power sources when mounted on refrigerated trailers and the serial interface is designed for integration with refrigeration unit protocols. FCC, Verizon, PTCRB, AT&T, CE, T-mobile, Anatel, E-Mark,RCM,NRCS,SUBTEL,ICASA,ROHS,Nom,iftel

Queclink

GV75MG

The GV75MG is the LTE version of the GV75W motorcycle tracker. The product’s dependability brings peace of mind to motorcycle owners around the world. It features Queclink’s zero power consumption, allowing bikers to leave their motorcycles unattended for long periods of time without having to worry about a flat battery. The product’s waterproof and dustproof enclosure makes it suitable not only for motorcycles but also for quad bikes, watercraft and heavy machinery.

Queclink

Queclink GV75MG SAT

GV75MG-SAT

The GV75MG SAT is a telematics device that supports Cat M1/GSM and NTN-IoT satellite networks. It can be widely applied in various transportation scenarios such as freight logistics and asset tracking, and can also be used for positioning ocean-going ships. The device features a wide voltage range of DC 9-90V and an IP67-rated waterproof design, allowing it to operate stably and reliably over the long term in various environments.

Queclink

GV851CEU

GV851CEU/GV851CNA

The GV851 series is a 4G programmable Linux-based telematics gateway with a wide range of interfaces, consisting of multiple I/Os, a serial port, and BLE connectivity. With an open Linux-based platform, it enables fleet service providers and system integrators to create featured applications that cater to different market needs. Moreover, the flexible solution allows for the integration of proprietary CAN libraries or protocols, providing extensive personalization and customization options.

Queclink

MCX GSM Antenna

MCX GSM antenna is an optional external antenna for GV800G.

Queclink

Queclink Temperature Sensor

1-Wire Temperature Sensor

The DS18B20 1-wire digital temperature sensor is utilized to detect temperature changes within fleet management. It has an eight meter cable suitable for various installation demands. Two ways to connect: 1.The 1-wire temperature sensor works with Queclink trackers GV65 series, GV600 series, GV300 CAN, GV800G, GV350MG and GV600MG. 2.The 1-wire temperature sensor should be used in combination with the AC100 kit to work with Queclink trackers GV300 series and GV75 series. The AC100 kit is a RS232 to 1-wire conversion accessory with a one meter cable which supports up to four temperature sensors simultaneously.

Queclink

UFS301

The UFS301 is advanced ultrasonic fuel sensors equipped with high-precision ultrasonic probes for accurate fuel level detection. The UFS301 model features an RS485 interface, catering to varying communication requirements in terms of mode, speed, and distance.

Queclink

WID330

The WID330 is a BLE 5.2 beacon for tool and asset tracking in logistics and warehouses. Paired with Queclink’s tracking devices, it enables real-time asset monitoring. With a robust waterproof rating, it operates reliably in harsh environments. Installation is easy and -use double-sided tape for quick attachment or screws for long-term stability.

Queclink

WMS301

The WMS301 is used to detect door open and close status and to measure temperature and humidity levels. The product is easy to install and features IP66 waterproof housing, making it ideal for cold chain logistics, trailer and container tracking applications when working with Queclink BLE trackers.

Queclink

WRL300

The WRL300 is a BLE 5.1 relay to control external signals. This accessory can work with Queclink’s tracker which has BLE interface. The accessory is ideal for vehicle and motorcycle access control, building access control, etc.

Queclink

WTH301

The WTH301 is used to measure temperature and humidity levels in logistics and transportation. The product is easy to install and features IP66 waterproof housing, making it ideal for cold chain logistics, trailer and container tracking applications when working with Queclink’s BLE trackers.

Queclink