Skip to main content
العربية
IPTech

Queclink GL33CG

Back to Products
Queclink GL33CG
Queclink

Queclink GL33CG

The GL33CG is a LTE CAT1 fallback 2G tracking device covered with a box specially designed for cargo recovery. It is ideal for recovering expensive merchandise which is packed mainly with on boxes and might be stolen in transport before they arrive at the destination. It transmits the GPS/LBS location information via LTE CAT1/GSM/GPRS to server and can be detected by a search device (detector device) operating (433/434MHz) through RF signal.

Interested in this product?

Get in Touch

Key Features

  • The GL33CG is a LTE CAT1 fallback 2G tracking device covered with a box specially designed for cargo recovery
  • It is ideal for recovering expensive merchandise which is packed mainly with on boxes and might be stolen in transport before they arrive at the destination
  • It transmits the GPS/LBS location information via LTE CAT1/GSM/GPRS to server and can be detected by a search device (detector device) operating (433/434MHz) through RF signal
  • RF433: Frequency band 433~434MHz
  • Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings
  • Geo-fences: Geo-fence alarm and parking alarm, supports up to 20 internal geo-fence regions
  • Low Power Alarm: Alarm when backup battery is low
  • Power On Report: Report when the device is powered on
  • Temperature Alarm: Report when the detected temperature is outside or inside a predefined range.
  • Emergency Mode: Enter emergency mode when the device receives command via GPRS or SMS or when jamming is detected.
  • Flight Mode: Turn off cellular function when airborne.

Approvals & Certifications

ANATEL

Connectivity

Cellular

Physical Specifications

Weight91gOperating Temp.-20℃ ~ +60℃ -30℃ ~ +70℃ for storage

Related Accessories

Queclink ATP100
BLE SensorBLE

ATP100

The ATP100 external tire pressure monitoring sensor, paired with Queclink’s tracking devices, allows for real-time tire pressure and tire temperature monitoring, and real-time alerts of abnormal tire pressure. The data collected by the ATP100 is transmitted to Queclink’s tracking device via BLE, and then uploaded to the backend server. The ATP100 external tire pressure monitoring sensor is easy to install, and features tamper and theft resistant design, as well as long standby time with replaceable battery. It can be used on SUV, minibus, pickup, golf s, motorcycle, small campers, etc.

Queclink

View Details
Queclink ATP102
BLE SensorBLE

ATP102

The ATP102 built-in tire pressure monitoring sensor, paired with Queclink’s tracking devices, allows for real-time tire pressure and tire temperature monitoring, and real-time alerts of abnormal tire pressure. The data collected by the ATP102 is transmitted to Queclink’s tracking device via BLE, and then uploaded to the backend server. The ATP102 built-in tire pressure monitoring sensor features large battery capacity, long standby time, accurate tire pressure measurement and built-in installation to avoid damage. It can be used on SUV, minibus, pickup, golf s, motorcycle, small campers, etc.

Queclink

View Details
Queclink ATP200
BLE SensorBLE

ATP200

The internal strip TPMS sensor collects tire pressure, tire temperature data, transmits to repeater or receiver by RF433, the sensor is installed on the inner hub of the tire by strap.

Queclink

View Details
Queclink CAN100
CAN AdapterCAN

CAN100

CAN100 decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. The CAN100 provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors. This accessory is available in three versions: 1.CAN100 STD, suitable for GV350MG, GV300, GV300W, GV75 and GV75W devices 2.CAN100 INV, suitable for GV300, GV65 and GV65 Plus devices 3.CAN100 INV with cable, suitable for GV300, GV65 and GV65 Plus devices

Queclink

View Details
Queclink CAN100 BLE
CAN AdapterCAN

CAN100 BLE

The CAN100 BLE decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. It provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors via BLE.

Queclink

View Details
Queclink DR200
Cable1-Wire

DR200

The DR200 includes an RFID reader and two RFID cards which can communicate with the Queclink GV series models through the 1-wire interface. It is used for driver identification in fleet management applications. Supported devices: GV65/GV300CAN/GV56/GV56RS/GV350MG (1-wire connection) GV300/GV300W/GV75/GV75W (RS232 connection by Queclink AC100 Kit)

Queclink

View Details

Related Software

IPTrack
Software

IPTrack

IPTech

View Details

Have questions about this product?

Browse the FAQ →