Cement Industry Use Cases
Explore use cases tailored for the Cement Industry industry
15 use cases
Blending bed
Cement Industry
To attain high quality and uniform material consistency in the finished cement, the raw material is homogenized in a so-called blending bed. The rock is distributed evenly over the blending bed with a...
Cement silo
Cement Industry
Before further processing, the cement is stored in tall silos. The cement is transported both in and out of the silo via pneumatic conveying. Efficient storage and transport of the product is ensured...
Clinker cooler
Cement Industry
To produce cement, the raw meal is burned to clinker in a long rotary kiln. After leaving the rotary kiln, the clinker has a temperature of up to +1300 °C and must be cooled down to a temperature of a...
Clinker silo
Cement Industry
After the raw meal is burned, the emerging clinker of varying consistency is stored for further processing. The silos are filled and emptied through different openings. Continuous operation of the sub...
Compressor
Cement Industry
The air compressor system generates the necessary compressed air to transport the material from the silos via the network of feed pipes. To ensure a smooth, steady flow of material, reliable pressure...
Conveyor belt
Cement Industry
Bulk aggregates are fed into production processes via conveyor belts or screw conveyors. For effective feed control to and from these processes, or inter-production unit billing, the mass flow of the...
Conveyor belt transfer station
Cement Industry
The transport of coarse and fine bulk solids within a stone processing facility takes place in most cases via conveyor belts. To achieve an even throughput and compensate for volume fluctuations durin...
Crusher
Cement Industry
The large boulders are extracted from the solid bedrock with blasting. This very first stage in the process is needed to enable these very large rocks to be crushed by smaller, secondary jaw and rolle...
Cyclone
Cement Industry
In clinker production, cyclones are used to preheat the raw meal. Before the raw meal enters the rotary kiln it is preheated to +900 °C in the cyclone. Constant monitoring of the buildup thickness on...
Mobile diesel tanks
Cement Industry
Diesel is stored in tanks on construction sites to supply the construction vehicles with fuel directly on site. A sufficient supply of diesel fuel is essential for optimal construction site operation....
Raw meal silo
Cement Industry
Before being burned in the rotary kiln, the material from the blending bed and the aggregates are ground to a fine raw meal in large mills. The powdery material is then transported to the silo by a pn...
Silo for solid fuels
Cement Industry
Large amounts of energy are needed to burn clinker in rotary kilns. Apart from conventional energy sources such as gas, oil and coal, solid substitute fuels such as dried sewage sludge, old tires or m...
Stacker
Cement Industry
To maintain a high quality and uniform material consistency in the finished cement, the raw materials are homogenized in a blending bed. To achieve this the rock is distributed evenly over the blendin...
Tank for liquid fuels
Cement Industry
Large amounts of energy are needed to burn clinker in rotary kilns. Substitute liquid fuels such as spent oils or recovered solvents are often used for this purpose. The fuel storage tanks often conta...
Truck loading
Cement Industry
Dust-free, closed loading systems are needed for fine aggregates and finished products such as cement. Automated loading of trucks is preferred in the industry and, while the load quantity is determin...
Looking for a complete solution?
Browse Solutions