Tracking Solutions

CANCrocodile

Contactless reader for vehicle telematics that reads CAN bus messages through wire insulation without cutting it or making electrical contact. Generates a digital CAN 2.0B (SAE J1939) output matching the connected bus, protecting the vehicle electronics from active requests by the telematics unit. Powered from the on-board network, no configuration required.

Technoton

CAN100

CAN100 decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. The CAN100 provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors. This accessory is available in three versions: 1.CAN100 STD, suitable for GV350MG, GV300, GV300W, GV75 and GV75W devices 2.CAN100 INV, suitable for GV300, GV65 and GV65 Plus devices 3.CAN100 INV with cable, suitable for GV300, GV65 and GV65 Plus devices

Queclink

CAN100 BLE

The CAN100 BLE decodes information from vehicles digital buses (CANBus and J1708) for vehicle monitoring. It provides information that indicates the vehicles current state, including vehicle odometer, fuel level, engine speed, engine temperature and state of doors via BLE.

Queclink

1708Crocodile

Contactless reader designed to securely obtain vehicle operation data from an on-board J1708 bus (SAE J1587) without cutting wire insulation. Its output interface is J1708 per SAE J1587; when reading an RS-485 bus the output corresponds to the RS-485 standard. Installed on vehicles equipped with a J1708 bus such as American/Volvo trucks and John Deere tractors.

Technoton

CANCrocoLITE

Compact, flat, open-frame contactless reader for reading CAN bus data of personal cars and light commercial vehicles through wire insulation without interfering with electronic circuit integrity. A basic, low-cost solution generating a digital CAN 2.0B (SAE J1939) output fully corresponding to the connected vehicle bus. Powered from the on-board network, no configuration required.

Technoton

CANCrocodile Mini

Compact modification of the CANCrocodile contactless reader that reads CAN J1939 bus messages without cutting wire insulation or making electrical contact. Reduced dimensions ease installation in tight spaces. Outputs a CAN 2.0B signal to any telematics unit with a CAN port, with less than 1% message losses.

Technoton

FMSCrocodile

Contactless reader-converter that reads data from a vehicle on-board CAN bus over the SAE J1939 protocol, processes and sorts the information, and transmits ready-to-use FMS and Telematics messages to the CAN J1939/S6 telematics interface. A two-in-one device — contactless reader plus FMS gateway — that protects the CAN bus from active requests and includes an automatic trip fuel-consumption counter.

Technoton

ALL-CAN300

CAN adapter for reading CAN bus data from any vehicle and any kind of transport

Teltonika Telematics

Teltonika CAN-CONTROL

CAN Control

CAN adapter for car-sharing solutions to remotely lock/unlock a vehicle and control its windows

Teltonika Telematics

ECAN02

Warranty-friendly CAN adapter for contactless access to CAN bus data

Teltonika Telematics

LV-CAN200

CAN adapter for reading CAN bus data from passenger cars, light commercial vehicles, trucks, and buses

Teltonika Telematics