Tracking Solutions

DFM Industrial

Flow meter for measuring the flow rate of non-corrosive liquids in the petrochemical and other industries, utilities, heat-power equipment, power plants and water transport. Models DFM 7 and DFM 25 cover flow rates up to 7.2 and 25 m³/h respectively with ±0.5% inaccuracy. Offered with a normalized pulse output or a CAN 2.0B interface conforming to SAE J1939, with IP65 protection.

Technoton

Delta

High-precision differential fuel consumption sensor for modern diesel engines. Measures fuel flow without modifying the fuel supply system. Features dual temperature sensors for thermal correction and Hall sensor with magnetic field processing algorithms.

Eurosens

Direct

Single-chamber fuel flow meter with embedded microprocessor and anti-magnetic protection. Measures fuel consumption from 1 to 500 liters per hour for engines, boilers, burners, and compressors. Features hardened alloy construction with anti-friction coating.

Eurosens

Direct 1500/3000/5000

High-capacity fuel flow meters for direct diesel fuel measurement with ranges from 30 to 5000 liters per hour. Available in three models: Direct 1500 (30-1500 L/h), Direct 3000 (60-3000 L/h), and Direct 5000 (250-5000 L/h). Features impulse and digital interfaces including NMEA2000.

Eurosens

DFM Marine

Fuel flow meter for measuring diesel fuel consumption in engines of vehicles, river and sea-going vessels, diesel generators, boilers and burners. Models DFM 1000/2000/4000 cover flow rates up to 4000 L/h with ±0.5% inaccuracy. Offered with a normalized pulse output or a CAN 2.0B interface conforming to SAE J1939 and NMEA2000, with an RS-485 / Modbus RTU register map available. ABS Type Approval certified.

Technoton

DFM S7

Wireless fuel flow meter for measuring diesel fuel consumption in engines of vehicles, boats, diesel generators, boilers and burners. Transmits data over Bluetooth 4.1 using the Technoton S7 bus telematics protocol and is battery-powered with at least 5 years battery life. Single-chamber and differential dual-chamber models cover flow ranges up to 500 L/h with ±1% inaccuracy.

Technoton

Liquid Counter

High-precision liquid counters for measuring liquid flow by mass and volume and for determining liquid density and temperature. The LC Corio range uses a Coriolis-force measuring principle with RS-485 (Modbus RTU) output and conversion to CAN J1939/S6, covering volume flow from 7 to 6,700 L/min with ±0.21% volume accuracy. The LC Ring range uses a ring-type chamber with autonomous, CAN J1939, pulse and Bluetooth interfaces, models 15/30/60 up to 66 L/min at ≤0.5% error.

Technoton

NozzleCrocodile

Contactless injector pulse reader that reads engine/LPG nozzle (injector) control impulses through wire insulation and converts them into normalized voltage pulses whose count is proportional to the volume of consumed fuel. Used for petrol and LPG fuel consumption monitoring on light commercial vehicles whose CAN bus does not provide fuel-consumption data. Requires per-vehicle pulse-value calibration.

Technoton