Eurosens Delta

DFM Industrial

Flow meter for measuring the flow rate of non-corrosive liquids in the petrochemical and other industries, utilities, heat-power equipment, power plants and water transport. Models DFM 7 and DFM 25 cover flow rates up to 7.2 and 25 m³/h respectively with ±0.5% inaccuracy. Offered with a normalized pulse output or a CAN 2.0B interface conforming to SAE J1939, with IP65 protection.

Technoton

DFM Marine

Fuel flow meter for measuring diesel fuel consumption in engines of vehicles, river and sea-going vessels, diesel generators, boilers and burners. Models DFM 1000/2000/4000 cover flow rates up to 4000 L/h with ±0.5% inaccuracy. Offered with a normalized pulse output or a CAN 2.0B interface conforming to SAE J1939 and NMEA2000, with an RS-485 / Modbus RTU register map available. ABS Type Approval certified.

Technoton

DFM S7

Wireless fuel flow meter for measuring diesel fuel consumption in engines of vehicles, boats, diesel generators, boilers and burners. Transmits data over Bluetooth 4.1 using the Technoton S7 bus telematics protocol and is battery-powered with at least 5 years battery life. Single-chamber and differential dual-chamber models cover flow ranges up to 500 L/h with ±1% inaccuracy.

Technoton

Liquid Counter

High-precision liquid counters for measuring liquid flow by mass and volume and for determining liquid density and temperature. The LC Corio range uses a Coriolis-force measuring principle with RS-485 (Modbus RTU) output and conversion to CAN J1939/S6, covering volume flow from 7 to 6,700 L/min with ±0.21% volume accuracy. The LC Ring range uses a ring-type chamber with autonomous, CAN J1939, pulse and Bluetooth interfaces, models 15/30/60 up to 66 L/min at ≤0.5% error.

Technoton

NozzleCrocodile

Contactless injector pulse reader that reads engine/LPG nozzle (injector) control impulses through wire insulation and converts them into normalized voltage pulses whose count is proportional to the volume of consumed fuel. Used for petrol and LPG fuel consumption monitoring on light commercial vehicles whose CAN bus does not provide fuel-consumption data. Requires per-vehicle pulse-value calibration.

Technoton

DDS

Axle load sensor for vehicles with spring (leaf) suspension using magnetoresistive sensing element. Converts lever rotation angle to output voltage proportional to axle load changes. Available in analog, CAN, and RS-485 interface variants.

Eurosens

Pro5 Lite

Ruptela

WS4-P4G1RS

UbiBot

FMC650

Teltonika Telematics

Iridium Edge Pro

Edge Pro

Iridium

GV350CEU

Queclink

HCV5 Lite

Ruptela