Skip to main content
العربية
IPTech

Technoton DUT-E ATS

Back to Products
Technoton DUT-E ATS - Image 1
Technoton

Technoton DUT-E ATS

Automatic tank calibration bench station for calibrating diesel fuel and stationary tanks fitted with a DUT-E fuel level sensor. It pumps diesel fuel at a rated speed to build a tank calibration table saved directly into the sensor memory, with calibration error within ±0.5% of tank volume. Controlled over Bluetooth 4.1 from an Android device and compatible with K-Line/S6, RS-232, RS-485, CAN, analog/frequency and Bluetooth/S7 sensors.

Interested in this product?

Get in Touch

Key Features

  • Automatic tank calibration for tanks with installed DUT-E sensor
  • Calibration error within ±0.5% of tank volume (±1.0% for complex shapes)
  • Maximum tank capacity 700 L; speeds up calibration 4-6×
  • Controlled over Bluetooth 4.1 via Android "Service ATS" app (Android 4.4.2+)
  • Three operation modes: automatic, semi-automatic, continuous
  • Compatible with fuel level sensors from any manufacturer
  • Supports K-Line/S6, RS-232, RS-485, CAN, analog/frequency, Bluetooth/S7
  • Autoshutdown on pressure/temperature excess

Approvals & Certifications

ISO 9001:2015

Physical Specifications

Operating Temp.-10 to +30 °C

Related Products

Technoton 1708Crocodile
CAN AdapterRS485

1708Crocodile

Contactless reader designed to securely obtain vehicle operation data from an on-board J1708 bus (SAE J1587) without cutting wire insulation. Its output interface is J1708 per SAE J1587; when reading an RS-485 bus the output corresponds to the RS-485 standard. Installed on vehicles equipped with a J1708 bus such as American/Volvo trucks and John Deere tractors.

Technoton

View Details
Technoton CANCrocoLITE
CAN AdapterCAN

CANCrocoLITE

Compact, flat, open-frame contactless reader for reading CAN bus data of personal cars and light commercial vehicles through wire insulation without interfering with electronic circuit integrity. A basic, low-cost solution generating a digital CAN 2.0B (SAE J1939) output fully corresponding to the connected vehicle bus. Powered from the on-board network, no configuration required.

Technoton

View Details
Technoton CANCrocodile
CAN AdapterCAN

CANCrocodile

Contactless reader for vehicle telematics that reads CAN bus messages through wire insulation without cutting it or making electrical contact. Generates a digital CAN 2.0B (SAE J1939) output matching the connected bus, protecting the vehicle electronics from active requests by the telematics unit. Powered from the on-board network, no configuration required.

Technoton

View Details
Technoton CANCrocodile Mini
CAN AdapterCAN

CANCrocodile Mini

Compact modification of the CANCrocodile contactless reader that reads CAN J1939 bus messages without cutting wire insulation or making electrical contact. Reduced dimensions ease installation in tight spaces. Outputs a CAN 2.0B signal to any telematics unit with a CAN port, with less than 1% message losses.

Technoton

View Details

Have questions about this product?

Browse the FAQ →